With my Epson and Visioneer scanners, the last settings I used are saved for the next time I invoke a TWAIN scan. With my HP scanners (All-in-one printers), the TWAIN scan settings reset every time I use it. Is there a workaround to set my own default TWAIN settings?
I would like to set the default settings as 8-bit grayscale 150dpi instead of 24-bit color photo 200dpi.
Quick Summary is created and edited by users like you... Add FAQ's, Links and other Relevant Information by clicking the edit button in the lower right hand corner of this message.
Most HP scanners have their own software which allows you to save settings - are you trying to use a 3rd party program for scanning? If not, the HP settings should be in the HP Director (I think that's what it's called - the main program where you can get to the scanner / fax / printer settings) under Options I think. You can save default options in there and they should stick.
minidrag said:Most HP scanners have their own software which allows you to save settings - are you trying to use a 3rd party program for scanning? If not, the HP settings should be in the HP Director (I think that's what it's called - the main program where you can get to the scanner / fax / printer settings) under Options I think. You can save default options in there and they should stick.
Yes, I'm using a 3rd party program that accesses the scanner through the TWAIN interface. If I use HP's own program, the setings will stick. But I'm looking for a way to retain the TWAIN scan settings like I can with Epson and Visionner scanners.
|
 |
|
|
While FatWallet makes every effort to post correct information, offers are subject to change without notice. Some exclusions may apply based upon merchant policies.
