Can get to sleep again, huh?

Why not put all this useful information up on a permanent "web site"?

Maybe you could call it "The FatWallet Computer Forum FAQ"?

This is a very informative post, but doesn't explain how to do some things, like:

7. Configure PPPoE with logon/password for DSL or DHCP for cable modem
8. Enable IPSec Passthrough if you need to connect to a VPN at the office


I am trying to set up a network consisting of 3 computers. Here is what we have:

SBC Yahoo! DSL
Speedstream(?) Cable Modem
Netgear WGR614 Router
Computer 1 (Linkworld) is a custom-built PC with K7S5A Pro mobo (includes NIC), Athlon 2000+, etc.
Computer 2 (GQ) is a GQ computer from Fry's with NIC built in. There is also a Syntax USB adapter connected to it.
Computer 3 (eMachines) is an eMachines T1090. Also has a Siemens Speedstream USB network adapter. No NIC.

Linkworld, GQ, cable modem and Router are in the same room. Currently, I have the cable modem connected to the router and the router connected to the NICs in the first two computers. Both computers can get the DSL. In a perfect world though, GQ would be connected wirelessly to the router, rather than having to drag a cable across the floor. Also, eMachines should be connected wirelessly too (Currently, it is not connected to the DSL at all.)

And of course, security is very important. I don't want credit cards or passwords flying through the air on an unsecured connection.

Previously, I had tried (when we were on dial-up) setting up an Ad Hoc connection between the eMachines and an old CTX using two Speedstram adapters, but it was very hard to set up and I needed someone's help and once I got it going, it stopped, so I pretty much gave up.

So now that I have the DSL, I would like to first get it set up wirelessly to all of the computers (except Linkworld can be wired, since it is right next to the router) and eventually file and printer sharing. How EXACTLY do I go about doing this?

Thanks.

Many Gracias! Ellory Da MAN!

The Westell VersaLink 327W is known to have some problems, but it is a good DSL modem.

Now connecting to this modem should be very easy.

Open your browser and go to http://192.168.1.1/ <<---This is your DSL modem

The username and password should be the same as your DSL account.

In the page that opens, bring your cursor over "Connections" and a drop down
menu will appear, select "Wireless" It will request your login info.

- 1) "Wireless operation" set to enabled.
- 2) "Mode" set to "Mixed"
- 3) "4x Support" set to "Enabled"

       DO NOT fool around with the "Advanced Configuration" unless someone
       who knows what they are doing talks you through this.

- 4) "Authentication Type" set this to "Shared Key"
- 5) "WEP Security" set this to "Enabled"

- 6) "Key Select" set to "Key 1" then enter a 13 digit (128-bit) alpha numeric code.

       Now unless you are going to be needing more than one key, you only need to set
       the first one. So unless your 802.11 card supports higher, set
       this to 128-bit encryption and be sure to save the details to a text file in
       case you ever need to look it up again. You'll also need this key for setting
       up your connection on your system.

       Also be sure to include the "Network Name (SSID)" in the file, this will be needed.


- 7) "Hide SSID" set this to "Enabled"
- 8) "MAC Address Filtering" this is optional and can be left "Disabled"

Now hit the "Save" button and you are now ready to setup your wireless connection on your system.

Now use Start > Programs > Accessories > Communications > Wireless Network Setup Wizard

If you have any problems with your 1450 mini-PCI card, go to the DellTalk Forums
and do a search for 1450 and you should be able to find some threads which can point
you to better drivers located on the HP website for your card.

As to your VersaLink DSL modem, you'll find that any problems which occur with this
are caused by excessive heat buildup inside the modem housing. If you look at the way
the case is built, you'll notice that the cooling vents are very restrictive and not
very good for cooling. This is what causes the problems you'll read about in some other
forums.

To fix this, carefully open the case and remove the circuit board being careful not
to damage it and take note of how it goes back in. Now using either an X-acto knife
or a Dremel, you can open the cooling vents in the case by cutting out the obstructing
vents.

Once you finish, reassemble the modem and everything should work great after that
cause with the vents open, there won't be any heat buildup to cause any problems.

Awesome post.

One question though: I am getting a new computer tomorrow. I just shared all my files, and they are all on my kids computer too. Now if I delete files from this computer, will they also be deleted from my kids computer? (like my pictures etc). If so, how can I avoid that?

ellory said:If the files are shared, then there is only one version. Deleting the diles will delete completely remove them.

If the files are a copy, then there are two versions.

If you have only shared them, then you can make a copy on the kids computer via standard windows drag and drop copy capbilities (on the kids computer open the shared files and make a copy. It would, of course, be good practice to also burn a copy to CD

Thank you! That is what I ended up doing. Anything I can with the iTunes list as well? Can that be shared?

BokooI'm not sure entirely understand your question.

For clarity, could you read the first sticky and post back in a new thread with all the relevant information?

In the meantime, this may help

Hi,
I am using Verizon wireless. Recently, after install CounterSpy and Mcfee personal firewall, my laptop can still connect to the wireless network with exellent signal, but I cannot use internet anymore. What happens? Is it due to the firewall?


ellory said:I took my laptop away for a few days, and when I came back Ihave internet connection but can't share files or printers

In all likelihood, one or both of the following holds true

1. You have software firewalls installed on your PCs and your router is handing out DHCP addresses. In this case, when you reconnect, the router hands out an IP address outside of the "trusted zone." The software firewall then blocks the connection

Solutions: Temporarily disable the software firewall to verify the problem /solution. Then either (a) expand the IP range of the software firewall to match the DHCP assignment range of the router, or restrict the DHCP range of the router to match the software firewall "safe" IP addresses. Reboot and you're good to go

2. You are using the Windows Wireless Zero Configuration Utility (WZC). This has many known problems

Solution: Download and install the latest version of the wireless configuration utility from your wireless NIC card supplier. Use that utility instead of WZC

ellory said:truongmymy said:Hi,
I am using Verizon wireless. Recently, after install CounterSpy and Mcfee personal firewall, my laptop can still connect to the wireless network with exellent signal, but I cannot use internet anymore. What happens? Is it due to the firewall?Since you lost wireless connectivity right after you installed these two products, then its quite likely this is the cause. You might try ensure that your firewall is properly configured. You might check your IP addresses. This thread may provide some insights on troubleshooting

You are great. My network runs well now. Thank you very much.

Have RCN residential cable in Boston area with several desktops hooked up through a Toshiba PCX DOCSIS (PCX2200) and some hubs along the way. Works fine.

Can I attach a wireless router to a hub running off the Toshiba and turn it on for the very rare occassion we'd be using a wireless connection to the laptop?

Would be essentially connecting a wireless router to a hub coming from a hard wired router. Do two routers make a conflict or is it OK?

BTW, great column on the networking.