$59 for Gas Furnace or Heat Pump Tune-Up and Safety Inspection!

Accurate Air, a top rated service provider on Angie's List, is offering a 21-point furnace tune-up for only $59! This service is normally valued at $129, saving Angie's List members $70! This tune-up includes a standard gas furnace cleaning (or heat pump) and check-up.

This 21-point furnace tune-up includes the following:

1. Remove, clean and adjust main gas burners
2. Remove, clean and adjust ignition/pilot assembly
3. Thoroughly brush and vacuum clean the heat-exchanger(s) and combustion chambers
4. Inspect heat-exchanger(s) & combustion chambers for cracks, rusting or problem areas
5. Inspect the flue assembly and test flue gas drafting mechanism
6. Test and inspect all furnace safety controls
7. Test, record and adjust gas pressure
8. Replace or clean standard air filters
9. Lubricate all fan motors and all moving parts
10. Measure and adjust blower for correct airflow
11. Adjust all dampers and set proper blower speed(s)
12. Clean, level, test and calibrate thermostat
13. Inspect and test thermocouple output as well as pilot safety switch
14. Measure and record electrical voltage, amperage and component resistance
15. Inspect and test all system transformers, relays, contactors and controls. Measure performance
16. Perform a complete and thorough electronic carbon monoxide check
17. Perform a complete combustion efficiency analysis (gas furnace only)
18. Monitor refrigerant (Freon) pressures and temperatures (heat pump only)
19. Test and record super-heat and sub-cooling. Compare with factory specifications (heat pump only)
20. Test defrost cycle to confirm unit initiates defrost and exits defrost cycle properly
21. Test and inspect electric back up heater elements (heat pump only)