Dual Extrusion 1.75mm ABS/PLA/PVA 3D Printer
*** NEWS FLASH! ***C|net, one of the most prestigious sites for consumer electronics reviews and information, has given this printer an overall 7.4 "Very Good" rating.Click here to read their review.*** NEWS FLASH! ***Join the 3D printing revolution with this Dual Extrusion 3D Printer from Monoprice!3D printing is the hot ticket now, primarily because it allows you to cheaply produce a design prototype prior to manufacture and, as can be seen from news reports, even make finished, usable products.This 3D printer features a dual extrusion head, which allows for two color print jobs. It can use 1.75mm ABS, PLA, and PVA filaments and supports layer thicknesses from 0.1 ~ 0.5 mm. The extruder can be heated to 250°C and the metal heating plate can be heated to 120°C. It prints at a rate of 24cc per hour.The printer comes with two 1kg reels of PLA filament.Support Files: User's Manual (May 16, 2014)Sales Brochure (Oct 15, 2014)Manual de Usuario (Español) (Dec 11, 2014)MONOPRICE will replace defective 3D printers with a new, refurbished, or used printer, at MONOPRICE'S discretion, if the RMA is issued within thirty (30) days of the original date of purchase, as shown on the original invoice. After 30 days, individual defective parts will be replaced with new parts, if the RMA is issued within six (6) months of the original date of purchase. All returned products and parts are the property of MONOPRICE and must be returned to MONOPRICE for a replacement to be issued.