Solve problems with ease. The equations in this book are relevant to the following subjects:
Geotechnical • Moisture content, dry density, void ratio, degree of saturation, relative density of soil, borrow soil, flow net, laboratory permeability tests, and effective stress • Shear strength and angle of internal friction for triaxial test • Net and ultimate bearing capacities of square, continuous, and circular footings with or without water table • Active, passive, and at-rest lateral forces per unit length of wall with surcharge load and water table, and lateral force per unit length of wall for sloping backfill and vertical wall • Gross and net bearing capacity of mat foundation in saturated clay, and depth of fully compensated mat foundation • Factor of safety against overturning and sliding of retaining walls, maximum stress at the toe, and minimum stress at the heel • Settlement of normally consolidated clay with up to 4 layers of soil given surcharge load, settlement at the center and corner of mat foundation, time rate of settlement, slope stability in saturated clay, and cyclic stress ratio • 2-strut braced cut for sand, soft to medium clay, and stiff clay • Skin friction resistance, end-bearing and allowable capacities of single pile in sand or clay
Water Resources and Environmental • Pitot tube, venturi meter, and orifice • Reynolds number, friction factor, head loss using Darcy-Weisbach equation or Hazen-Williams equation, Bernoulli equation with 2 different pipe sizes, pump head, and head loss due to fittings • Open channels using Manning equation for circular, rectangular, and trapezoidal channels • Flow rate and velocity of flow for circular channel when flowing full or partially full just by entering diameter of pipe, depth of water, Manning’s n, constant, and slope of energy line (no need to look up tables!!!) • Flow rate and velocity of flow for trapezoidal channel just by entering depth of water, base width of channel, side slope horizontal, Manning’s n, constant, and slope of energy line • Chemical feed rate • Rapid mixing • Overflow rate • Detention time • Weir loading rate
Transportation • Sight distance and stopping sight distance • Radius of curve, tangent of curve, length of curve, middle ordinate, and external distance of horizontal curve • Stopping sight distance, passing sight distance, curve elevation, stationing of highest or lowest point of curve, and vertical clearance • Flexible and rigid pavement design
Structural • Maximum moment of simply supported and cantilever beams, moment of inertia for I-beam, T-beam, and inverted T-beam using parallel axis theorem, maximum bending stresses, and deflection of beam
This book contains 200 equations with keystrokes included for HP 35s and HP 33s calculators plus sample problems with step-by-step solutions.
Thanks for visiting FatWallet.com. Join for free to remove this ad.
posted: Dec. 1, 2013 @ 6:26a
Expired deal now $28.
posted: Dec. 16, 2013 @ 10:45p
The above thread about the various aspects of the Free Kindle Book Useful Equations for HP 35s or HP 33s Calculator for the Civil PE Exam quite informative and one can surely access a good amount of knowledge out of the same.
Senior Member - 5K
posted: Dec. 16, 2013 @ 10:47p
starknest said: Expired deal now $28. Strange two week bump above, but back to $40 now. Very dead.
Disclaimer: By providing links to other sites, FatWallet.com does not guarantee, approve or endorse the information or products available at these sites, nor does a link indicate any association with or endorsement by the linked site to FatWallet.com.
Members of our community may attach files to a post in accordance with the User Agreement. FatWallet is not responsible for the content, accuracy, completeness or validity of any information contained in any attached file. Files have *not* been scanned for viruses. Be especially wary of Excel files which may contain malicious content.
Earn Cash Back while you shop - just 3 simple steps.
1. Sign Up so we know who to pay! (It's FREE.)
2. Shop through FatWallet for deals from your favorite stores. Your online purchases earn Cash Back that builds in your FatWallet account.
3. Get Paid by requesting a payment via check or PayPal.
FatWallet coupons help you save more when shopping online. Use our Coupons Search to browse coupons and offers from thousands of stores, gathered into one convenient location.
As part of our FatWallet Community, you can share deals with almost a million shoppers in our forums. Forum content is generated by consumers for consumers. Share deals, money-saving tips, and more. It's FREE, fun, and addicting.
Our customer experience team is here around the clock - real people ready to assist.