Apex Tactical Specialties M&P Polymer Forward Set Sear and Trigger Kit, Black 

PURPOSE:

The Apex Polymer Forward Set Sear and Trigger Kit features a solid polymer trigger body, with center pivoting safety. This kit will set the trigger break point farther forward than the factory trigger assembly as well as, significantly reduce the uptake and over travel. It produces a trigger pull very similar to that of a 1911 but in a polymer frame striker-fired pistol. The Polymer Forward Set Sear & Trigger Kit boasts a smooth trigger pull throughout the break. The rounded trigger face provides the user with a comfortable surface for the firing finger. The kit comes with two (2) trigger return springs; one designed to produce approximately a 4.0 lbs trigger pull (silver spring), and one to produce a 5.0 lbs trigger pull (green spring). These two options give the end user the ability to customize their trigger pull for their specific needs. 

Applicable to the following:

  • Works with all Smith & Wesson M&P Pistols in all centerfire calibers and configurations.
  • Requires the use of the sear housing block designed for the large size sear plunger and spring (current production as of June, 2011).
  • Does NOT function=small in the M&P Shield, BodyGuard, 22 or 22 Compact pistols.

 INCLUDED IN THE PACKAGE:

  • 1 ea. Polymer Forward Set Trigger
  • 1 ea. Forward Set Sear
  • 1 ea. Ultimate Striker Block Kit (Striker Block, Spring and Talon Tactical Tool)
  • 1 ea. Forward Set Spring Kit (Silver 4.0lb Trigger Return Spring, Green 5.0lb Trigger Return Spring, Polymer Slave Pin, Sear Spring and Blue RAM Spring)

 EXPECTED RESULTS:

  • Reduced trigger pre-travel and over travel to produce a feel similar to a single action fire control system
  • Overall reduction in trigger travel is approximately 50%
  • A smooth trigger pull all the way through to the break
  • Reduced reset
  • Center mounted pivoting safety maintains factory safety values
  • 4.0 lbs (silver spring) or 5.0 lbs (green spring) trigger pull weight, depending on which trigger return spring is installed

 
Notes

This particular product usually requires a slight modification to the trigger bar loop for proper function.

**This kit REQUIRES the use of the larger 1/8 inch sear spring and plunger set up. If your M&P has a 1/16th inch diameter sear plunger and spring, we strongly advise you upgrade to a new style sear housing block before installing this product. All function and reliability testing was done with a 1/8 inch sear plunger and spring, therefore we cannot guarantee proper function without the appropriate size sear plunger and spring. 


Apex Tactical Specialties M&P Polymer Forward Set Sear and Trigger Kit, Black 

1239 Views
0 Comments
Add Comment
  • Quick Reply:  Have something quick to contribute? Just reply below and you're done! hide Quick Reply
     
    Click here for full-featured reply.


Disclaimer: By providing links to other sites, FatWallet.com does not guarantee, approve or endorse the information or products available at these sites, nor does a link indicate any association with or endorsement by the linked site to FatWallet.com.

Thanks for visiting FatWallet.com. Join for free to remove this ad.

While FatWallet makes every effort to post correct information, offers are subject to change without notice.
Some exclusions may apply based upon merchant policies.
© 1999-2016