posted 48 years ago by
Senior Member - 1K


Apply Coupon Code:


$50.00 Off

design cues from high-end table saw rip fences, the Kreg Precision Router Table System features a fully enclosed, t-square style fence for complete use of your miter slot and small adjustments on the fly. Its vibration and noise resistant MDF table has a high-pressure laminate Easy-Slide Micro-Dot skin, which makes it easy to slide workpieces across the surface. It also boasts a precise insert plate that mounts to any router without the usual extra holes you don't need. Bottom-up levelers feature eight individual contact points for leveling accuracy, and dual reducing rings (2 inches; 1-13/16 inches) provide the convenience of Porter Cable guide bushing capability. For added flexibility, independent fence faces allow the table to double as a vertical jointer.Features

Fully enclosed self squaring fence travels parallel to miter slot.
Precision lens cursor offers incredible accuracy without a tape measure and pencil.
Professionally edge banded, steel-strut reinforced MDF top.
Impact resistant easy-slide micro-dot skin.
Phenolic insert plate (9-1/4 x 11-3/4 x 3/8).
Dual reducing rings (2, 1-13/64) feature Porter-Cable guide bushing compatibility.
Unique bottom-up levelers feature 8 individual contact points for leveling accuracy.
Independent fence faces allow the table to double as a vertical jointer.

What's in The Box

Kreg PRS1045 Precision Router Table System
Kreg PRS3090 Castors locking set of 4
Kreg KMS7215 Micro Adjuster
Kreg PRS3020 Dual Feather Boards set of 2
Kreg PRS3100 Switch
Kreg PRS3400 Setup Bars Set
Kreg PRS7850 Precision Router Table Stop
Owner’s Manual

The table alone normally sells for $500 and this set has a lot of great accessories. By accessories they mean many things you'll need.

The wheels alone typically sell for $55+, the feather boards are $35, the table stop is $35, setup bars are $40+, Micro Adjuster is $15, and the switch is $35.

Add Comment
Sorry, there are much better deals out there.
Rockler and MLCS sell much higher grade tables and plates for the same price.
Either brand sells a phenolic table top (as opposed to Melamine, which can expand in humidity) and aluminum insert plate (won't warp over time), as well as a high-end fence, for $399 before specials. I just got mine for $319 on Amazon, with a 20% off special.
You would have to add a stand and feather boards, for approx $140. Total would be $530, but less than $500 on special.

If you want a cheaper melamine table, fence, and phenolic insert plate, like Kreg is offering, they have those too, for approx $299. That INCLUDES the stand! You can easily knock that down another $30 or so with coupons/specials. That's little more than half the price of the Kreg system, and of comparable quality.

BTW: For $55, you can get some mighty nice casters at HD or Lowes that are far superior to the Kreg ones. All those accessory prices, except the featherboards, are really marked up.

Disclaimer: By providing links to other sites, FatWallet.com does not guarantee, approve or endorse the information or products available at these sites, nor does a link indicate any association with or endorsement by the linked site to FatWallet.com.

Thanks for visiting FatWallet.com. Join for free to remove this ad.

While FatWallet makes every effort to post correct information, offers are subject to change without notice.
Some exclusions may apply based upon merchant policies.
© 1999-2017